12
11
Memory switch
Your hearing instrument can be programmed up to 4 different listening programs.
When the hearing instrument is turned ON, it will automatically be in last setting.
Other preset programs are for your specific needs that can be accessed by
pressing the multi-function switch which will change program according to the
preset sequence: 1, 2, 3 and 4.
Your hearing instrument ‘beeping’ signal will help identity preset programs.
Example: program 1 will emit 1 beep, program 2 will emit 2 beeps, etc.
Troubleshooting
SYMPTOM
No sound
or low sound
Whistling,
feedback
POSSIBLE CAUSE
Low battery
Sound outlet blocked or damaged
SOLUTIONS
Recharge the instrument
Clear up dome or contact hearing
healthcare professional
Volume too low
Choose another program
Built-in delay power ON feature
Wait a few seconds for the device to
turned on
Excessive ear wax built-up
Remove/clear wax built-up or contact
your hearing care professional
Hearing instrument not fitted well
in the ear.
Remove and reinsert the instrument
Excessive earwax in your ear
Contact your hearing care professional
Volume too loud/high
The instrument was not fitted well
in the ear
Choose another program
Re-adjust or re-insert the instrument
NOTE: The programs are preset by your hearing
care professional or the manufacturer.
Maintenance
Standard program setting and recommended using environment:
Program 1
Normal
Outdoor
z
Program 2 Program 3 Program 4
Traffic
Restaurant
POCO SA
