17
ICARUS SERIES
Open the package, take out the product with foam still attached, and gently place it on a desktop or table. Remove the extra
parts and the foam covering the back of the monitor. Pree the release button to remove the stand plate.If the monitor
was already attached to the stand, remove the stand.
This monitor only includes screws which may be used when attaching the
monitor to a VESA 75*75mm type mount. No VESA mount or mounting
accessory is included.
Remove the original screws x4 ( ) from the
opening in the back of the monitor.
Follow the directions received with your mount, stand, or
accessory and install the monitor on the wall or fixture as desired.
Remember to use the included 4 screws when mounting the
monitor. Refer to the image ( ) for correct screw placement.
Follow the directions received with your mount,
stand, or accessory and install the monitor on the
wall or fixture as desired.
Do not discard the original screws. These may be needed for future use.
4. Wall Mounting
1
2
3
4
