MCS260B
CORNERSTONE 260B MONOCHROMATORS
35
Figure 30: TracQ Basic Screens.
10.4 LOW-LEVEL COMMANDS
A command set is provided for those wishing to create their own programming. A list of these
commands is provided in Appendix I
of this user’s manual. Commands are simple to use. For
example, to query the wavelength, enter “WAVE?” The command to close the shutter is
“SHUTTER C”. A full list of commands is available in Appendix I of this user’s manual.
10.5 MONO TERM SOFTWARE
The Oriel MonoTERM utility is also provided for sending low-level commands found in Appendix I
to the monochromator. This is a convenient example for assisting programmers in their software
development efforts.
The MonoTERM utility was developed in National Instruments LabVIEW and is included on the
memory stick provided with the instrument.
Figure 31
1
: Query Using MonoTerm Software.
