Newport CARMEL, Owner'S Manual And Safety Instructions

Page: 7 / 16

4. Assembly
Assembly Preparation
Find a smooth flat surface.
Remove any sharp objects from the flat
surface where the boat will be assambled
and inflated.
Unfold and spread out the boat flat.
Locate the inflation valves which are
tagged with a bright orange flag.
The valve retainer cap is inside of the
orange flag.
Attach the nozzle which is fixed to the
hose to the pump by screwing it clockwise
into the port marked “INFLATE”.
Attach the nozzle with the twist lock (as
shown) to the other end of the hose.
NOTE:
The one-way valve makes
inflation easy. The inner valve
design allows air to flow into the
hull but not out. Make sure the
plastic stem is in the lock position
for inflation, by pushing it in and
turning clockwise. To unlock the
valve and release air, push in and
turn counter-clockwise.
NOTE:
When you want to prepare the boat for
storage, attach the fixed end to the port
marked “DEFLATE” to pump to remove all air
from the boat.
LAYOUT ON FLAT
SMOOTH SURFACE
LOCATE INFLATION
VALVES
PREPARE FOOT PUMP
- 7 -