PEAK VALUE SUBMENU:
Includes Peak Value in the data string.
Press
d
44)
Display flashes previous selection for
PEAK
Submenu.
Press
b
45)
Scroll through the available selections: NO, YES.
Press
d
46)
Display shows
STRD
stored message momentarily and then
advances to
GROS
only, it was changed, otherwise press
a
to
advance to
GROS
Gross Submenu.
GROSS VALUE SUBMENU:
Includes Gross Value in the data string.
Press
d
47)
Display flashes previous selection for “Gross”.
Press
b
48)
Scroll through the available selections: NO, YES.
Press
d
49)
Display shows
STRD
stored message momentarily and then
advances to
UNIT
only, if it was changed, otherwise press
a
to
advance to
UNIT
Unit Submenu.
UNIT SUBMENU (not applicable):
Press
d
50)
Display flashes previous selection for
UNIT
.
Press
b
51)
Scroll through the available selections: NO, YES.
Press
d
52)
Display shows
STRD
stored message momentarily and then
advances to
ADDR
only, if it was changed, otherwise press
a
to
advance to
ADDR
Address Setup Submenu.
ADDRESS SETUP SUBMENU:
This menu is applicable to the RS-485 Option only.
Press
d
53)
Display advances to “Address Value” (0000 to 0199)
Submenu.
ADDRESS VALUE SUBMENU:
Press
d
54)
Display flashes 1
st
digit of previously stored Address Value.
Press
b
&
c
55)
Press
b
and
c
to enter new “Address Value”.
Press
d
56)
Display shows
STRD
stored message momentarily and then
advances to
TR.TM
only, if it was changed, otherwise press
a
to
advance to
TR.TM
Transmit Time Interval Submenu.
38
Summary of Contents for i Series
Page 17: ...13 3 2 Menu Configuration Figure 3 1 Flow Chart for ID and Set Points Menu ...
Page 52: ...NOTES 48 ...
Page 53: ...NOTES 49 ...
Page 54: ...NOTES 50 ...
