12
Step 4: Press the power button
on the front panel or the power button
on the
remote control again to power off the panel. The power indicator turns off.
Step 5: If you are not going to use the unit for an extended period of time, we
recommend you to switch off the general power switch.
Step 1: Ensure that the HDMI or VGA interface and external devices are connected
properly.
Step 2: Select the corresponding signal source on the signal source page. The
Windows page is displayed.
Step 3: Select Tablet PC Settings on the Control Panel page.
If the cursor position has a big deviation from the actual touch point, calibration is used
to eliminate the deviation. Positioning is required in the following scenarios:
●
The computer with OPS inserted is used.
●
The computer is connected through the HDMI or VGA interface.
If the positioning is not correct, perform the following operations to calibrate again:
Position
Interface operation on Android system does not need positioning. External
devices with Microsoft Windows 7 or later versions require positioning.
Note
