Page 7
Raymor Showers / Pivot Door Set
STEP 3
1. Adjust the Door and Return Panels evenly on the tray and into the Wall Channels.
2. Bring the corner joint together and drill and fasten this point (A1, A2 and A3).
3. Align the Door Assembly and Return Panel evenly to the walls and tray.
4. Square up the door frame and door and ensuring the magnetic door catch is in line.
5. Fasten as detail in diagram below (B1, B2 and B3).
STEP 4
1. Fasten the handle in place (A).
2. Apply silicone to the outer boundaries as indicated with dotted lines (B).
Note: Sealing on the inside of the shower will void the warranty.
ALLOW 24 HOURS FOR
SILICONE TO DRY BEFORE
USE
A
B
3.2 DRILL
BIT
A1
B1
A2
B2
A3
B3
A
B
B
