Newland NQuire 200, User Manual

Page: 26 / 48

nlscan.com Page 18
Configuration
Miscellaneous settings
1. Device name: You can type a random name which you will use to for your
own administration.
2. Authentication: You can choose whether or not you want a password protection
to access the NQuire configuration tool via a username and password.
3. Programming barcode security:
- Programming mode timeout: The time before returning to idle state when no
programming barcode is scanned in seconds.
- Security code: You can also program the NQuire with a so-called 2D batch
code (only for 202/232 models, see Appendix ) . As you don’t not want to
allow just anyone to be able to program the unit with barcodes, you can set a
security code out of which you can create a barcode to enable programming
with a batch code.
4. Text and messages:
- Idle message timeout: the period of time before the idle message is displayed
again after a scan in seconds.
- Error message timeout: the period of time the NQuire device waits for a
response from the host pc/server in seconds. When this timeout is exceeded,
the error message will be displayed for 5 seconds.
- Font codepage: Choose either UTF-8 (universal fontset which supports most
used language fonts) or one of the following codepages:
Codepage Description
852 “Multilingual” West European Latin-1
866 Cyrillic DOS codepage
874 Thai
1250 Central and East European Latin
1251 Cyrillic
1252 West European Latin-2
1254 Turkish
1257 Baltic
5. Interaction:
- Decide on the level of contrast of the display dependant on the user
environment and display reading angle.
- Choose between different types of beeper tones and volumes dependant on
the user environment.
6. GPIO:
You can set the parameters for the GPI ports to "On read GPIO" (only wehn
information passes through, "On change"(state change GPI port) or by
"polling" the GPI port including the eventual poll speed (continuous process).