180
Set Length Range for Chinese Sensible Code
The scanner can be configured to only decode Chinese Sensible Code barcodes with lengths that fall between (inclusive)
the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths.
@CSCMIN
Set the Minimum Length (Default: 1)
@CSCMAX
Set the Maximum Length (Default: 7827)
Minimum length is not allowed to be greater than maximum length. If you only want to read Chinese
Sensible Code barcodes with a specific length, set both minimum and maximum lengths to be that desired
length.
Set the scanner to decode Chinese Sensible Code barcodes containing between 8 and 12 characters:
1.
Scan the
Set the Minimum Length
barcode.
2.
Scan the numeric barcode “8” from the “Digit Barcodes” section in Appendix.
3.
Scan the
Save
barcode from
the “Save/Cancel Barcodes” section in Appendix.
4.
Scan the
Set the Maximum Length
barcode.
5.
Scan the numeric barcodes “1” and “2” from the “Digit Barcodes” section in Appendix.
6.
Scan the
Save
barcode from
the “Save/Cancel Barcodes” section in Appendix.
Summary of Contents for NLS-HR42
