Newland NLS-HR20-RF, User Manual

Page: 20 / 98

12
Chapter 3 Wireless Communications
Pairing the Scanner to a Dongle
The scanner that comes with a USB dongle is already paired with it and can work out of the box through plug and play. You
simply plug the dongle into the USB port of your computer, pull the trigger on the scanner, and the connection will be
automatically established with a beep from the scanner. If the scanner within service range fails to connect to the dongle,
you may re-establish pairing by following the steps below: unplug the dongle, scan the Enter Pairing Mode barcode and the
Pair barcode with the scanner, and then plug the dongle into your computer.
Enter Pairing Mode
Pair
Communication Modes
Real-time Mode: The scanner attempts to transmit every barcode you scan. When you are out of service range, the
scanned data will be lost.
Inventory Mode: Scanned data will be stored in the flash memory no matter whether you are in service range or not. You
may send the stored data to the host by scanning the Transmit Stored Data barcode. Do not change the interface before
starting data transmission operation, otherwise all data previously stored in the flash memory will be lost.
** Real-time Mode
Inventory Mode