Newland NLS-FM420 Integration Manual Download

Page: 14 / 199

nlscan.com

Page 4

Getting to Start

Unpacking

Unpack FM420 and accessories. Check with the packing list. Make sure that there is no damage or missing

part(s). If any damage or missing parts, please keep the original package and contact your supplier for

services.

Outline of FM420

The

gure below shows major components of FM420.

FM420 Outline

Indicator

Sensor Light

Illumination/Aiming Light

Lens

Note:

The scan window must be kept clean. Improper maintenance will breach the limited warranty.

Avoid rough objects not to damage or scratch the window.

Use brush to remove the stain.

Use soft cloth (cloth for glasses) to clean.

Prohibit spraying towards the window.

Only use clean water as a cleanser.

Summary of Contents for NLS-FM420








































































































































































































Search results

Summary of Contents for NLS-FM420

Reviews:

Related manuals for NLS-FM420

Brands by name

Popular brands

Newland NLS-FM420, Integration Manual

Search results

Summary of Contents for NLS-FM420

Reviews:

Related manuals for NLS-FM420

Brands by name

Popular brands