Newland NLS-EM2000, User Manual

Page: 66 / 141

56
Chapter 6 Data Formatting
In many applications, barcode data needs to be edited and distinguished from one another.
Usually AIM ID and Code ID can be used as identifiers, but in some special cases terminating character
suffix like Carriage Return or Line Feed can also be the alternative.
The engine can be configured to transmit barcode data in the following format:
[“F”/ “S”] + [Code ID] + [AIM ID] + [DATA] + [terminating character]
Note: [DATA] must be transmitted while user can decide whether to transmit any of the rest parts.
[“F”/ “S”]: decode result notification.
AIM ID Prefix
AIM (Automatic Identification Manufacturers) IDs define symbology identifiers and data carrier identifiers.
For the details, see
Appendix B: AIM ID Table . If AIM ID prefix is enabled, the engine will add the
symbology identifier before the scanned data after decoding.
Enable AIM ID Prefix ** Disable AIM ID Prefix