Newland NLS-EM2000, User Manual

Page: 12 / 141

2
About This Guide
This guide provides programming instructions for the EM2000. Users can configure the EM2000 by
scanning the programming barcodes included in this manual.
The EM2000 has been properly configured for most applications and can be put into use without further
configuration. Users may check the
Factory Defaults Table in Appendix for reference. Throughout the
manual, programming barcodes marked with asterisks (**) are factory default values.
Barcode Scanning
Powered by area-imaging technology and Newland patented technology, the EM2000 features
fast scanning and accurate decoding. Barcodes rotated at any angle can still be read with ease. When
scanning a barcode, simply center the aiming pattern projected by the EM2000 over the barcode.
Configuring the EM2000
There are two ways to configure the engine: barcode programming and command programming.
Barcode Programming
The EM2000 can be configured by scanning programming barcodes. All user programmable
features/options are described along with their programming barcodes/commands in the following
sections.