■
NL-8510 POS user manual
a.Under the menu shown in figure 3-21, press Key “1” to enter simple dial-up menu shown
as figure 3-22
_
_
MODEM
Test__
1. SYN Dial
2. ASYN Dial
figure 3-22
.
Ⅰ
Under the menu shown as figure 3-10 ,Press Key “1”.On synchronization dial state:
patching setting dialing number and TPUD judge the state of dialing, if
dialing fail will display ret=1, successful will display ret=0.
.
Ⅱ
Under the menu shown as figure 3-10 ,Press Key “2”.On asynchronism dial state: check
modem setting dialing number and TPUD, press “enter” waiting for the
dial-up response. If fail will display “NO DIALTONE”, successful will display “dial
successful” modem hand up.
Introduction: dial number is the same with normal telephone. For example: your can
add the comma inside the dialing number (Switch to the letter input
method, double press .button can input,) every comma means dial delay 2
sec
TPDU: Transfer Protocol Date Unit, not need to any setting.
b. Under the menu shown as figure 3-21, press Key “2” to enter advanced dial menu, shown
as figure 3-23
____
MODEM
Test ____
1 Hardware set 2. Dial
3. 115200 test
4. ASYN test
5.Initializtion
6.Version
figure 3-23
25
