7
Installing the Battery
Step 1: Unlock the battery cover latches as shown in the figure above and then remove the cover.
Step 2: Insert the battery as indicated into the battery compartment, with its metal contacts facing down and lining up with the
metal contacts on the inside of the terminal.
Removing the Battery
Step 1: Hold down the Power key for 5 seconds and then tap “Power off” to turn off the terminal. Unbuckle and loosen the
hand strap. Unlock the battery cover latches and remove the cover.
Step 2: Remove the battery.
Charging the Battery
There are two methods to charge the battery.
Charge with AC adapter:
Connect the MT65 to a power outlet using the included AC adapter. It takes about 4.5~5
hours to fully charge it (The terminal is shut down or in sleep mode).