**
【
Enter Setup
】
【
Exit Setup
】
68
Set Length Range for UCC/EAN-128
The scanner can be configured to only decode UCC/EAN-128 barcodes with lengths that fall between (inclusive) the
minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths.
If minimum length is set to be greater than maximum length, the scanner only decodes UCC/EAN-128 barcodes with either
the minimum or maximum length. If minimum length is same as maximum length, only UCC/EAN-128 barcodes with that
length are to be decoded.
【
Set the Minimum Length
】
【
Set the Maximum Length
】
Example: Set the scanner to decode UCC/EAN-128 barcodes containing between 8 and 12 characters
1. Scan the
Enter Setup
barcode.
2. Scan the
Set the Minimum Length
barcode.
3. Scan the numeric barcode
“8”. (See the “
Digit Barcodes
” section in Appendix)
4. Scan the
Save
barcode. (
See the “
Save/Cancel Barcodes
” section in Appendix)
5. Scan the
Set the Maximum Length
barcode.
6. Scan the numeric barcodes
“1” and “2”.
7. Scan the
Save
barcode.
8. Scan the
Exit Setup
barcode.
Summary of Contents for HR1550-30 Wahoo
