Newland BS8050-3V Piranha, User Manual

Page: 14 / 44

8
LED Notifications
Charging/Battery LED
Red LED on Charging in progress.
Green LED on Fully charged.
Red and green LEDs flash alternately Battery not found.
Red LED flashes Low battery alert.
If the scanner is on and it is not connected to PC via USB cable, pressing the Scan/Power
button and Delete/Reset button at the same time can display the battery level with the
Charging/Battery LED.
Green LED on Battery level is high.
Red and green LEDs on Battery level is medium.
Red LED on Battery level is low.
When the battery voltage is too low, the scanner will beep with flashing red Charging/Battery LED. Please
charge it immediately before the scanner shuts down mandatorily. When it shuts down, please charge it
fully before turning it back on.
Good Read LED
Green LED flashes Good read.
Data LED
Red LED flashes There is data in FLASH memory.
Red LED on FLASH memory depleted.
Function LED
Blue LED flashes slowly with long off state
Bluetooth turned on, but no Bluetooth
connection established and the
Piranha
not found.
Blue LED flashes slowly with long on state
Bluetooth turned on, but no Bluetooth
connection established and the
Piranha
found.
Blue LED on Bluetooth connection established.
Blue LED flashes quickly Data transmission via Bluetooth in progress.
Red LED on USB mode enabled.
Red LED flashes quickly Batch data transmission via USB in progress.