Newland BS8050-2V Piranha, User Manual

Page: 31 / 52

25
Step 4: Hold down the Function button and the Delete/Reset button on the scanner at the same time for
7 seconds to upgrade the firmware. The red and blue Function LEDs flash alternately during the updating
process.
Step 5: Wait for the
“Firmware upgraded!” window to pop up and click “OK” to exit the program.
Note: If this utility does not operate normally, check to see if the FirmwarePath in the UpdataTool.ini file is
correct (its value should be identical with the name of the .bin file). If there is a higher version of firmware,
replace the .bin file.