3
IMPORTANT -
Read these instructions carefully
before use and keep them for future reference.
Your child’s safety may be affected if you do not
follow these instructions.
1
Turn seat over and insert foot bar into bracket.
2
Press gray button on foot bar and slide the
foot bar into the bracket until it clicks into
place.
3
Remove front mounting bracket plugs on the
stroller by firmly pressing the black button
located above the front wheel and pulling up
on the plug.
4
Insert right Adapter Bracket into the right
mounting bracket until it clicks into place.
Repeat on left side.
NOTE:
The Adapter Brackets are labeled with
an L or R for your convenience. Left and right
are determined by standing in front of and
facing the stroller
5
Align mounting brackets on the second seat
with the top of the Adapter Brackets.
6
Insert seat onto Adapter Brackets until it clicks
into place.
To remove City Select® Second Seat:
7
Remove child from seat. Press grey buttons on
seat mounting brackets and pull up until the
seat detaches.
8
Press silver button on right Adapter Bracket and
pull upwards. Repeat on left side.
NOTE:
Replace mounting bracket plugs on
the stroller when second seat is not in use.
When Rear Facing:
NOTE:
Your City Select® Second Seat Kit can
also be used facing the rear of the stroller.
9
To make room for the seat’s footwell: Unzip the
right front and left front portions of the basket.
10
To adjust the footwell: Press both buttons
on the side of the footwell and pull footwell
upwards.
ASSEMBLY INSTRUCTIONS
• WARNING:
Total weight load recommended for
this seat unit is 45 lbs/20.4 kg.
• WARNING:
Always remove child from seat
before removing seat from frame.
WARNING:
EN
Summary of Contents for baby jogger City Select
Page 2: ...2 CLICK CLICK 1 2 3 4 5 9 6 10 7 8 ...
Page 7: ...7 ...
