After the brew cycle is complete,
the above screen will appear and
remain for 2-minutes before
returning to the blue QRC screen.
To change from default
“Combined” mode to
“Touchless” only mode tap
the
TEA & WATER
bar 3-
times to access the
Programming
screen.
Touch to highlight the “Combined” box.
Using the minus sign (-) tap
until “ON”
appears. If Touch only is desired, repeat
the procedure and tap until “OFF”
appears. Tap “Exit Setup Mode” when
finished. Then tap “Exit Programming”.
To get into the
Upper
Programming
mode, tap the
upper left corner 3x
then the
lower right corner 3x. Lower
Programming
mode: tap the
lower right corner 3x only
.
Upper Programming
mode
Lower Programming
mode
