13
Total run cycles
Total drinks dispensed
Total Water Usage
Total Gallons of water
dispensed*
Chocolate Grams
Chocolate grams remaining in
Hopper**
Milk Grams Remain
Milk grams remaining in
Hopper**
**NOT SHOWN IF POWDER
TRACKING IS DISABLED
Exit Statistics Mode
Water Temperature
Adjust Temperature 140 – 205 Deg F
Default 180
Powder Tracking
Turns Choc and Milk Powder Tracking
On-Off
Default is “Off”
Energy Save Mode
Turns on Tank Temperature Energy
Savings Mode
OFF, SEMI (Lowers tank temp), FULL
(Turns Tank Off)
Default is OFF
Energy Save Time
Timer from last dispense till Energy
Save kicks in
Cup Light
Turns on dispense Light in Cup Area
OFF, Dispense Only, Always On
Default is Dispense Only
Global Ratio (Reg & Decaf)
Sets Coffee to Water ratio across all
recipes
Separate Adjustment for Coffee and
Decaf
45:1 to 25:1 Defaults are both 30:1
Water Filter Size
Turns Water Filter tracking On or Off
OFF , 500-3000 Gallons
Default is Off
Call For Service #
Space to enter Contact Info that will be
shown on “Call for Service “ Screens
Drink Selection Menu-See page 14
Restore Factory Settings
Reset Machine to Factory Defaults
Touchless Mode
Exit Setup Mode
Programming Instructions
Screen will change to Program Menu Screen:
REPLACEMENT
WHIPPER SEAL
PN 781566
SEE PAGE 26
TAP 3 TIMES ON CENTER OF
BAR TO ENTER
PROGRAMMING MODE
IF A BREWING ICON IS
ACCIDENTLY TOUCHED USE
THE RETURN ARROW TO
TRY AGAIN
Water Filter
Remaining Gal
Not
shown if not filter
tracking is not enabled*
Shows water filter gallons left
before filter change*
Water filter Reset
Select this after changing
filters to reset water filter
countdown*
Whipper Seal
Remaining
Powdered drink cycles
remaining before
changing the Whipper
Seal
Whipper Seal Reset
Reset count after
changing Whipper Seal
Clean Pumps
Access Pump
Cleaning Menu**
Prime Pumps
-
Access Pump
Priming Menu See
Page 14
Exit Maintenance Mode
Primary Newco Server
(Future Use)
Secondary Server
(Future Use)
Sleep Timeout
Time brewer will stay awake
before entering sleep screen
Brewing Screen
Toggles between Slates or
Display Installed Logo Screen
Default is Slates
Install Logo & Load
Software Update *See Page
17
Network Setup *See Page
17 Instruction #2
Exit Local Setup Mode
Summary of Contents for Bistro Touch BISTRO-TCH
Page 26: ...26 Whipper Disassembly 2 3 4 5 6 1 7...
Page 32: ...32 Wiring Diagram P13...
Page 33: ...33 Notes...
