background image

 

newair.com

 

SAFETY INFORMATION & WARNINGS 

 

Please read the following guidelines carefully before using this air conditioner. 

 

Only use this unit in household or residential settings. 

 

Always keep the unit on a flat surface and in a dry place. Keep at least 20 inches of 

space on all sides of the unit to maintain efficiency and safety. 

 

The power cord must comply with the safety regulations outlined in this guide.  

 

Always ensure reliable grounding, and only use a compatible wall plug for the power 

cord. 

 

After installing the air conditioner, make sure the plug is undamaged and can be 

inserted into the outlet securely. 

 

Keep air intake and output openings free of any obstruction. 

 

The air conditioner must be installed in accordance with all relevant wiring 

regulations. Do not attempt to modify the wiring of this unit.  

 

The air conditioner should not be used anywhere near gasoline appliances, stoves or 

other heat sources or combustible materials.  

 

Always keep the power cord out of the way to prevent tripping hazards. 

 

If the power cord is damaged, it must be replaced by the manufacturer, an 

authorized service agent or similarly qualified person in order to avoid safety 

hazards. 

 

This appliance can only be used by children 8 years old and above, and must not be 

used by persons with reduced physical, sensory or mental capabilities or lack of 

experience and knowledge. They must be given supervision or instruction concerning 

use of the appliance in a safe way and understand the hazards involved.  

 

Children must not play with the appliance.  

 

Cleaning and user maintenance must not be done by children without supervision. 

Prohibitions: 

 

Do not install the air conditioner in bathrooms or other places where it could come 

into contact with water or moisture build-up. 

 

Turn the unit off before unplugging the power cord. 

 

Do not place anything on top of the unit, or inside any of the air vents. 

 

Do not use insecticide spray or other flammable substances in the vicinity of the air 

conditioner. 

 

Be careful not to splash any liquids on the unit, and do not wash it directly with water 

or other liquids. It is safe to wipe the unit with a damp cloth, but ensure that it is 

completely dry before turning it on. 

 

Do not wipe the air conditioner with chemical solvents such as benzene, gasoline, 

alcohol, etc. If the air conditioner is dirty, please clean only with neutral detergents. 

 

WARNING:

 Immediately stop using the unit if the ambient temperature in the room 

rises above 104 

 

Summary of Contents for 1803032















Reviews: