13
Installing DSB on custom built cabinet
The installation must conform with local codes or, in the absence of local codes, with the
National Fuel Gas Code, ANSI Z223.1/NFPA 54, Natural Gas and Propane Installation Code,
CSA B149.1. If you are connecting an appliance to a fixed fuel piping system specifying the
use of a rigid pipe, semi-rigid tubing, and/ or a connector that complies with the standard for
Connectors for Outdoor Gas Appliances and Manufactured Homes, ANSI Z21.75 CSA 6.27.
WARNING
Cabinet frame, cabinet side
panels and counter top must be
made from non-combustible
material.
DO NOT store or use products with flammable
liquids or vapors in the vicinity of the NewAge
Grill Cabinet,NewAge Outdoor Kitchen
cabinets or any appliances.
WARNING
Note to Installer:
All built-in appliances must use rigid pipe, semi-rigid tubing, or a connector complying with the
standard for Connectors for Gas Appliances, ANSI Z21.24. CSA 6.10, or Standard for Connectors for
Outdoor Gas Appliances and Manufactured homes, ANSI Z21.75. CSA 6.27, for the appliance which
are connected to fixed fuel piping system (Natural Gas).
WARNING
This gas appliance is designed for non-combustible enclosures only, and must be installed and
serviced by a licensed gas fitter to local codes.
As indicated on the rating plate, this gas grill is designed to operate with supply pressure of 7”
WC for Natural Gas. For installations where the gas supply pressure exceeds these requirements,
a regulator must be installed upstream of the grill’s components. If the gas supply pressure is
lower than these requirements, the unit will be under-fired and will not reach the maximum
temperatures. Ensure that the supply line size complies with local and/ or national installation
codes.
