New Yorker CL3-105SE, Installation, Operating And Service Instructions

Page: 5 / 44

5
110772-01 - 5/20
CL Installation & Service Manual
Table 1-2: Dimensional Data
Table 1-2: Rating Data
Boiler Boiler
Model Model
Burner Capacity Burner Capacity
Heating Heating
Capacity Capacity
(2) (2)
NET AHRI Ratings NET AHRI Ratings
(3) (3)
AFUE AFUE
% %
GPH GPH MBH MBH
(1) (1)
MBH MBH MBH MBH Sq. Ft. Sq. Ft.
CL-3-105SE CL-3-105SE 0.75 0.75 105 105 91 91 68 68 284 284 85.7 85.7
CL3-410SE CL3-410SE 1.00 1.00 140 140 121 121 91 91 378 378 85.0 85.0
CL4-168SE CL4-168SE 1.20 1.20 168 168 147 147 110 110 459 459 86.4 86.4
CL4-210SE CL4-210SE 1.50 1.50 210 210 181 181 136 136 566 566 85.1 85.1
CL5-245SE CL5-245SE 1.75 1.75 245 245 212 212 159 159 663 663 85.6 85.6
CL5-266SE CL5-266SE 1.90 1.90 266 266 230 230 173 173 719 719 85.3 85.3
(1) (1)
MBH refers to thousands of BTU per hour. MBH refers to thousands of BTU per hour.
(2) (2)
Based on standard test procedure prescribed by the United States Department of Based on standard test procedure prescribed by the United States Department of
Energy at combustion conditions of 13.0% CO Energy at combustion conditions of 13.0% CO
22
..
(3) (3)
Net AHRI Ratings are based on piping and pickup allowance of 1.333 for steam. Net AHRI Ratings are based on piping and pickup allowance of 1.333 for steam.
The CL Series boiler is a cast iron oil-fired low
pressure steam boiler designed for use in closed
heating steam systems. This boiler must be vented
by natural draft into a fireclay tile-lined masonry
chimney or chimney constructed from type L vent or
a factory built chimney that complies with the type HT
requirements of UL103. An adequate supply of air for
combustion, ventilation and dilution of flue gases must
be available in the boiler room.
The CL Series steam boiler uses a L404F
Pressure Limit and Low Water Cut-off. This boiler
has indirect domestic water heater connections
to generate domestic hot water. Optionally, this
boiler may include a L4006 Temperature Limit and
a tankless heater to generate domestic hot water.
1
Product Description, Specification and Dimensional Data
Boiler Boiler
Model Model
Dimensions Dimensions
Approv. Water Approv. Water
Content Gallons Content Gallons
Heat Transfer Heat Transfer
Surface Area Surface Area
Sq. Ft. Sq. Ft.
Recommended Minimum Chimney Recommended Minimum Chimney
"A" "A" "B" "B" "C" "C"
Round in Dia. Round in Dia. Rectangle Rectangle
in. x in. in. x in.
CL3 CL3 17-3/8" 17-3/8" 8-1/4" 8-1/4" 5-7/8" 5-7/8" 16 16 14.33 14.33 66
8 X 8 8 X 8
CL4 CL4 22-3/8" 22-3/8" 10-7/8" 10-7/8" 6-7/8" 6-7/8" 20 20 20.90 20.90 77
CL5 CL5 27-3/8" 27-3/8" 13-3/8" 13-3/8" 7-7/8" 7-7/8" 24 24 27.46 27.46 88
Maximum working water pressure: 15 PSI shipped standard from factory. Maximum working water pressure: 15 PSI shipped standard from factory.