Knorr-Bremse Group
Page 7 / 40
Copyright 2015© NYAB. All rights reserved, including industrial property rights applications.
NYAB retains any power of disposal, such as copying and transferring.
Locomotive Cab Display Module (LCDM)
Maintenance Manual
Doc. No. IP-235
03
1.1
Introduction
This document contains particulars specific to LCDM models P/N 782340 (74 VDC) and P/N
782342 (110 VDC). The purpose of this manual is to assure that the product is used appro-
priately and safely.
1.2
Technical changes
NYAB reserves the right to change the equipment or this document at any time without giving
special notice.
1.3
Target group for this document
This document is intended for use by NYAB trained service technicians who
have the skill, experience, safety awareness and professional ability:
to remove and install the equipment,
to inspect, maintain and debug the equipment,
have read and understood this document from start to finish, and
are familiar with the safety codes and accident prevention regulations for these activities.
1.4
Referenced Documents
DIN EN ISO 4764 Surfaces of Components Used in Mechanical Engineering and Light Engineering
DIN 5510 Part 2 Preventative Fire Protection in Railway Vehicles
EN 50155
Railways Applications Electronic Equipment Used on Rolling Stock
IEEE RS232
Data Interface
IEEE RS422
Electrical Characteristics of Balanced Voltage Digital Interface Circuits
IEEE RS485
Electrical Characteristics of Generators and Receivers for Use in Balanced Digital
Multipoint Systems
IEEE 802.3.10
Management Information Base (MIB) Definitions for Ethernet
ISO 13406-2
Ergonomic Requirements for the Image Quality of Flat Panel Displays
1 General information
Please read this document carefully from start to finish to ensure
safety of operation. Failure to follow the safety alerts will result in
death or serious injury.
This document will be useful to other target groups as well, e.g.
project engineers. However, it does not claim to provide complete
information for such target groups.
