New World SHU60 MK 2, Users Manual & Installation Handbook

Page: 10 / 16

INSTALLATION
Installation above a unit with a
drawer or door
The base of the appliance must be pro-
tected from damage e.g. drawers may
only be installed providing a partition
panel is fitted to the required dimensions
underneath the appliance.
Worktop
25mm
Oven
Hob
INSTALLATION ABOVE AN OVEN
Worktop
25mm
Partician
Hob
Partition
INSTALLATION ABOVE A UNIT WITH
A DRAWER OR DOOR
Connect to the electricity supply
We recommend that the hob is installed
by a competent person who is a member
ofa “Competent Person Scheme” & who
will comply with I.E.E. & locall regulations.
The electrical supply must be:
220 - 240V ~ 50Hz.
Connection must be made using a double
pole cooker control unit of 30 ampere
minimum capacity, with 3mm minimum
contact separation at all poles.
Connection should be made using a cable
suitable for the max. load of the hob (see
Technical Data Section).
Strip the wires & connect to the terminal
block as appropriate:-
L = Brown
N = Blue
Earth = Green/Yellow.
Fit the cable clamp & secure with the
screws provided.
Close the terminal box, ensuring that the
cover is closed and all screws in place.
The hob MUST earthed.
If the switch is directly behind the hob,
it should be at least 460mm above it and
the supply cable must be protected from
the heat.
Important: Make sure the electric supply
is switched off before connection is made.