background image

17

In

 more 

detail...

Installation guidelines 

Gas supply requirements

The appliance installation must be carried out in accordance with relevant local 

regulations.

The installation must be carried out by an authorised gas appliance installer and 

tested to local regulations.

We are not legally able to offer advice advice on the installation of gas appliances 

to un-authorised personnel.

Ventilation

All rooms require a window or equivalent (e.g. a door) which can be opened. 

Some rooms require a permanent vent or extractor in addition to a window (see 

below).

This unit must not be used in a room which is less than 5m³. The following table 

details the requirements based on the kitchen volume (L x W x H) in m³.

The above requirements also allow use of a gas oven and grill but if there are 

any other fuel burning appliances in the same room, consult the relevant British 

Standard (BS5440) or Gas Safe manual.

Room Volume (m³)

Air vent required (cm³)

5

100

6 to 10

50

6 to 11

No permanent vent required if a

 

door opens to the outside

11 or more

None required

The above requirements also allow use of a gas oven and grill but if there are 

any other fuel burning appliances in the same room, consult the relevant British 

Standard (BS440) or Gas Safe document. 

Technical and legal information

Summary of Contents for NWLEG75


























Reviews: