11
In
more
detail...
Operation
Operation
Manual “ON” switch (this is always possible even if the
electric current is off):
•
Turn the knob corresponding to the selected burner
in a counter-clockwise direction so that the knob is at
MAXIMUM (this corresponds to a large flame).
•
Use a piezo electric spark gas ignitor.
Automatic electric “ON” switch for burners with safety
device (thermocouples):
•
Turn the knob corresponding to the selected burner
in a counter-clockwise direction so that the knob is at
MAXIMUM.
•
Once the burner is lit, keep the knob pressed in for
about 10 seconds in order to allow the flame to heat
up the thermocouple. If the burner goes out when the
knob is let go, repeat the operation.
Note
•
The use of a gas cooking appliance produces heat and humidity
in the place where it is installed.
•
Therefore, you need to ensure the place is well ventilated,
keeping the natural ventilation openings clear and using a
mechanical ventilation device/ flue or electric fan.
•
Intensive or prolonged use of the appliance may require
additional ventilation, such as opening a nearby window or
increased ventilation efficiency obtained by increasing the power
of the mechanical ventilators, where applicable.
Advice for the best use of the burner:
•
When boiling point is reached, turn the knob to MINIMUM.
•
Always use pans with a lid.
Burner
Recommended pan diameters (cm)
Auxiliary
8-16
Semi-rapid
12-20
Rapid
18-22
Triple ring
22-26
