OM Series IP Telephony System Administrator Manual
www.newrocktech.com 5-3
Item Description
Pilot number
Enter the pilot number of this device. When the IP connection is disconnected, the inter-site
calling will be routed via PSTN.
Step4
Add other devices to the list
Click
Add
to input information of other devices in the network.
Step5
Broadcast the device list
The managing site, which is on the top of the list, will send the latest device list to other devices
in the network.
Regular Site
Step1
Select multi-site network form
Go to the
Multi-site
page and select
Simple
. See Figure 5-1.
Step2
Enable the auto discovery
Step3
Add managing device to the list
Click
Add
to input relevant information of managing site. See Figure 5-3.
Step4
Add this device to the list
Click
Add
to input information of the device.
Step5
Get the latest device list from managing site
The managing site, which is on the top of the list, will send the latest device list to other devices
in the network.
5.2 Multi-site Network with Complex Dialing Scheme
In this scheme, special dialing digits are added at the front and the end of the destination number to avoid
potential dialing number conflict. With this form, a large scaled multi-site telephony network can be built
up, in which the numbering plan of each device can be managed independently.
5.2.1 Configuration of Managing Device
The managing device is one of the devices in the multi-site telephone network, which is responsible to
Authenticate the devices in the network
Maintain and broadcast the latest address information of devices
Make change and broadcast the site prefix information
Make change and broadcast the outbound trunk sharing information
Response to the inquiry of the above information from other devices in the network
The procedure of configuring the managing device is illustrated below.
Step1
Input the domain name of the managing device
Go to the
Basic > Domain name
page. Enter IP address of managing site and click
Submit
.
