New Leader Hi-Way SA-6C, Manual

Page: 31 / 70

- 31 -
SA-6C
www.NewLeader.com
(800) 363-1771
96875-H
The SA-6C unit is an under-tailgate-type spreader designed for spreading abrasives and/or chemicals,
primarily for ice and snow control�
The SA-6C is a single spinner, single auger spreader� The entire unit mounts to the sides of a dump body
level with the floor of the box. A quick-disconnect mounting kit allows for installation and removal without
the use of tools�
The bottom trough functions as a hopper clean-out� It is held in place by a latch assembly�
The rear cover can be repositioned for use as a hopper cover� This allows normal dumping from the box
without filling the hopper with material or removing the spreader.
The SA-6C uses a single six-inch diameter auger with bi-directional flighting. A removable anti-flow cover
plate prevents material spillage when the auger isn’t operating�
The SA-6C is powered hydraulically� The standard control system is a manual dual hydraulic system, which
provides independent variable speed control for both the auger and the spinner�
The auger is powered by a direct drive hydraulic motor� A worm gear drive option is available� The other
end of the auger is supported by a flange-type ball bearing.
A gear-type hydraulic pump provides power to operate the units� Pump drives available are:
1� Through-shaft pump for truck transmission drive�
2� Electric clutch engaged V-belt drive from crankshaft pulley�
This product is intended for commercial use only�
General Description