BEGINNER
INTERMEDIATE
ADVANCED
Inserting the plugs
Inserting the plugs
QUICK-START GUIDE:
Your Core Magic arrives fully assembled. Follow the simple steps to select your
resistance level:
1. Remove all packaging and stand the product upright.
2. Remove all 8 end caps from your Core Magic.
3. Choose your resistance level, beginner (top), intermediate (middle) or advanced
(bottom) refer to below diagram for correct plug position.
4. Take 4 plugs (attached to bands) from above thigh pad and insert all 4 plugs, (one
at a time) into the hole with segment facing down. Twist clockwise 90 degrees
until segment “clicks” into place and faces left. This is locked position. Ensure all
four plugs are clicked into position before using your Core Magic.
5. Adjust figure 8 handle height by twisting clockwise or anti-clockwise to a position
where arms rest on figure 8 handle at a 90 degree angle from torso.
6. Do not twist anti clockwise past the max mark located on figure 8 handle thread.
Summary of Contents for Core Magic
Page 3: ......
