42
SYSTEM Button
The
SYSTEM
button is used to put the thermostat into either heating, cooling or
off. When in
OFF
, the system will not operate any heating or cooling appliances.
However, the LCD display will still show the room temperatures in each zone.
When in
HEAT
, the system is in heating. The heating appliance selected will
operate when the zone room temperature is one degree below the desired setpoint
temperature. The heating appliance will continue to run until the zone room
temperature is one degree above the desired setpoint temperature.
When in
COOL
, the system is in cooling. The cooling appliance connected in the
zone will operate according to the mode the zone is set to.
ZONE Button
This button allows the user to toggle through the different area zones.
By pressing the
ZONE
button, the user toggles through each zone. When the
system is first powered up, it determines how many zones are in the system and
only displays the detected zones.
MODE Button
By pressing the
MODE
button, the user toggles through the different modes for
the system. When in cool, the thermostat will toggle through the following modes:
Cool Auto, Cool High, Cool Low, Fan High, Fan Low and Off. When in heat, the
thermostat will toggle through the following modes: Gas Heat, Heat Elec and Off.
However, this will only happen if the system has both gas and electric heat in a
zone. For instance, if a system only has an air conditioner and a gas furnace in a
zone, then when set to heat, the user will only be able to toggle through Gas Heat
and OFF because there is no electric heat available. Furthermore, if the system
does not have an appliance connected in a zone, then the user will not be able to
toggle modes in that zone.
Setting the Thermostat
The thermostat default setting for each zone upon initial startup is 78°F for cooling
and 68°F for heating. The fan speed for the cooling mode is
COOL AUTO
, which
is set to vary the fan speed according to the cooling needs. The fan speed for the
heating mode is dependent on the type of heat that is installed for each zone and
cannot be changed.
Summary of Contents for MAJESTIC
