New Home NH1722S Instruction Manual Download | Manualshive

Page: 40 / 42

background image

www.toews.com

38

Troubleshooting

Condition

Cause

Reference

The needle thread
breaks.

The bobbin thread
breaks.

The needle breaks.

Skipped stitches

Seam puckering

The cloth is not
feeding smoothly.

The machine
doesn’t work.

Noisy operation

Page 13
Pages 14, 15
Page 6
Page 6
Pages 12, 13

Page 17
Page 9

Page 12

Page 36
Change the bobbin

Page 6
Page 6
Page 6
Pages 14, 15
Page 34
Page 16

Page 6
Page 6
Page 9

Page 9

Page 13
Change the needle

Pages 14, 15
Page 13
Page 9
Make stitch shorter

Page 35
Make stitch longer
Page 20

Page 4
Page 36
Pages 10, 11

Page 36
Page 36

1. The needle thread is not threaded properly.
2. The needle thread tension is too tight.
3. The needle is bent or blunt.
4. The needle is incorrectly inserted.
5. The needle thread and the bobbin thread are not set properly

under the presser foot at the beginning of sewing.

6. The threads are not drawn to the rear after previous sewing.
7. The thread is too heavy, or too fine for the needle.

1. The bobbin thread is not threaded properly in the bobbin

case and shuttle.

2. Lint has collected in the shuttle area.
3. The bobbin is damaged and doesn't turn smoothly.

1. The needle is incorrectly inserted.
2. The needle is bent or blunt.
3. The needle clamp screw is loose.
4. The needle thread tension is too tight.
5. The threads are not drawn to the rear after the previous sewing.
6. The needle is too fine for the fabric being sewn.

1. The needle is incorrectly inserted.
2. The needle is bent or blunt.
3. The needle and/or threads are not suitable for the work being

sewn.

4. A blue needle is not being used for sewing stretch, very fine

fabrics or synthetics.

5. The needle thread is not threaded properly.
6. The wrong needle is being used.

1. The needle thread tension is too tight.
2. The needle thread is not threaded properly.
3. The needle is too heavy for the fabric being sewn.
4. The stitch length is too long for the fabric.

1. The feed dog is packed with lint.
2. The stitches are too fine.
3. The feed dog is not raised after “drop feed” sewing.

1. The machine is not plugged in.
2. A thread is caught in the shuttle race.
3. The push-clutch is disengaged.

1. There is thread caught in the hook race.
2. Lint has built up in the shuttle or the shuttle race.

NH1722S Instruction Manual

www.toews.com

1722S Owners Manual/ User Guide

«
...
38
39
40
41
42
»

Summary of Contents for NH1722S











































Reviews:

No comments

Related manuals for NH1722S

Brand: Janome Pages: 2

Brand: ELNA Pages: 230

SEWHANDY MODEL 40K

Brand: Singer Pages: 12

Brand: Cleanfix Pages: 16

Pro-Stitcher BLPS3

Brand: Baby Lock Pages: 105

Brand: Beko Pages: 40

Brand: Beko Pages: 36

Brand: ELNA Pages: 31

Brand: SunStar Pages: 21

Brand: SunStar Pages: 37

Brand: SunStar Pages: 50

Brand: emerio Pages: 82

Brand: Duerkopp Adler Pages: 31

Brand: Duerkopp Adler Pages: 55

Brand: Duerkopp Adler Pages: 24

Brand: Duerkopp Adler Pages: 59

Brand: Duerkopp Adler Pages: 55

Brand: Duerkopp Adler Pages: 102

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands