New Holland TS-100A, Assembly & Instruction Manual

Page: 133 / 154

© 2004
Alamo Group Inc. 11 - 23
Maverick (NH TS-100A,115A, 125A, 135A Asy. Man) 01/05
Mounting Component ID - DIVERTER VALVE
Door / Swing Cylinder Diverter Valve. Asy: P/N 02977622
The Diverter valve is a electrical operated valve that allows the hydraulic pressure to be
shared to operate two (or more if valves are stacked) funtions with a single pressure supply. This
valve is strictly a diverter valve and is designed to direct the pressure, not regulate the flow or
pressure.
The Port openings on this diverter valve are marked with letter number codes which show
wich port is connected to which hose and where that hose connect on other end (See Figure 18)
Port Function & Connection
P1 Hose Hydraulic Pressure from Door / Swivel (B) Port on Control Valve
P2 Hose Hydraulic Return to Door / Swivel (A) Port on Control Valve
C1 Hose to Head Swivel Cylinder Base End
C2 Hose to Door Cylinder Base End
C3 Hose to Door Cylinder Rod End
C4 Hose to Head Swivel Cylinder Rod End
VS . 125/F
C2
C3
SAE 4
P1
P2
C1 Port this
side (Not
Seen), to head
swivel cyl base
end
C4 Port this
side (Not
Seen), to
head swivel
cyl rod end
These 4 holes are through holes
that would be used if this were a
stacking valve to stack two (or
more) valves together. These holes
are not used in this application.
These 2 threaded holes on back
side for mounting diverter valve
to frame (Not Seen)
C2 Port, to
door cyl base
end
C3 Port, to
door cyl Rod
end
P2 Port, Return to control
valve door / swivel port of
control valve
P1 Port, Pressure from Control
Valve door / swivel port of control
valve
Electric Solenoid
Electric solenoid retaing knob