SECTION 1 - GENERAL INFORMATION
1-6
GAUGE WHEELS
One on each front corner, one on each rear corner to
reduce scalping. Gauge wheels have four height position
adjustments.
HEIGHT OF CUT
Adjusts from 1.5” to 4.5” (38 to 114 mm) (7 positions)
UNCUT CIRCLE
0” uncut circle
ENGINE TO DECK DRIVE
HB-section Kevlar cord “V” belt from engine clutch
sheave to deck spindle sheaves. Spring loaded idler for
belt tension and take-up
SPINDLE ASSEMBLIES
Three 17-mm diameter spindles turning in permanently
lubed ball bearings. Die cast aluminum spindle housings.
BLADES
Three 18” x 2.5” x .187” heat treated steel blades
TIP SPEED
17,500 ft/min (5334 m/min) @ 3400 RPM nominal
18,070 ft/min (5507 m/min) @ 3500 RPM max
DECK MOUNTING
Deck suspended from front frame by four trunnion rods
and attached to lift mechanism by two multi-position links
(“pork chops”).
OPTIONAL EQUIPMENT
Recycler Kit
Light Kit
Snow Plow Attachment
Tire Chains
Smooth Castor Wheel Kit
Striping Kit
Decal Kit - Canada
CERTIFICATION
Conforms to California CARB and EPA Certification.
Conforms to ANSI B71.1-2001
MZ19H
Find manuals at https://best-manuals.com
