New Holland MZ19H, Repair Manual

Page: 5 / 21

SECTION 1 - GENERAL INFORMATION
1-3
SPECIFICATIONS
MZ19H
ENGINE
Type............................................................... Kawasaki
Model............................................................. FH580V
Horsepower ................................................... 14.2 kw (19)@3600 RPM
Cylinders........................................................ V-Twin
Displacement................................................. 585CC (35.7 cu. in.)
Low Idle Speed.............................................. 1400 RPM
Maximum Speed:
High Idle .................................................... 3400 RPM
Oil Capacity ...................................................
1.9 qt. (1.8L)
Spec Number................................................. AS13
Fuel Unleaded Gasoline ................................ 87 octane min.
Vertical Shaft ................................................. 1 in. (2.54 cm) Dia
Charge coil .................................................... 12v - 13 amp
Other.............................................................. Air cooled, Dual element air cleaner, Fuel pump,
Overhead valve, Four cycle, Electronic ignition, Full
pressure lubricated with oil filter
CONSTRUCTION
Front Frame................................................... Welded 1 x 2 x .120 structural steel tube
Rear Frame ................................................... Welded, 7 and 10 ga. high strength steel
Frame Assembly............................................ Front and rear frames bolted together
FUEL SYSTEM
Capacity......................................................... 5 Gallon (18.9 L)
Type............................................................... Single fuel tank fender mounting on left side
Other.............................................................. Fuel tank shut-off, Fuel filter (replaceable in-line type),
Large diameter vented fuel cap, Tank includes molded
beverage holder
TRACTION SYSTEM
Transaxles ..................................................... Twin Hydro-Gear Hydrostatic Transaxles
Transaxle Drive ............................................. Belt drive with self-tensioning system
Ground speed................................................ Infinite, 0 to 7-MPH (10.5-km/hr) forward, 0 to 3.4-MPH
(5.5-km/hr) reverse
Transport Rods.............................................. Allow unit to be moved without engine running
ATTACHMENT DRIVE
Clutch ............................................................ Electric Clutch
Type............................................................... Vertical drive with single deep B-groove Pulley
Find manuals at https://best-manuals.com