New Holland H8060 Service Manual Download Page 7 | Manualshive

Page: 7 / 51

background image

INTRODUCTION

Basic instructions - Important notice regarding equipment servicing

[YCG667001-], H8060, [YCG667001-], H8080

All repair and maintenance work listed in this manual must be carried out only by qualified dealership personnel,
strictly complying with the instructions given, and using, whenever possible, the special tools.

Anyone who performs repair and maintenance operations without complying with the procedures provided herein
shall be responsible for any subsequent damages.

The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional, or
local dealers, reject any responsibility for damages caused by parts and/or components not approved by the manu-
facturer, including those used for the servicing or repair of the product manufactured or marketed by the manufacturer.
In any case, no warranty is given or attributed on the product manufactured or marketed by the manufacturer in case
of damages caused by parts and/or components not approved by the manufacturer.

The information in this manual is up-to-date at the date of the publication. It is the policy of the manufacturer for
continuous improvement. Some information could not be updated due to modifications of a technical or commercial
type, or changes to the laws and regulations of different countries.

In case of questions, refer to your NEW HOLLAND AGRICULTURE Sales and Service Networks.

47487696 17/01/2013

3

Find manuals at https://best-manuals.com

«
...
5
6
7
8
9
...
»

Summary of Contents for H8060




















































Reviews:

No comments

Related manuals for H8060

Brand: OMCA Pages: 72

Brand: Barko Hydraulics Pages: 92

Brand: DARAY Pages: 24

Brand: Jafar Pages: 9

KOMPAN SPF28666S

Brand: Bommelland Pages: 23

Brand: Patty-O-Matic Pages: 28

Brand: Zimmer Pages: 54

Brand: Zimmer Pages: 4

Brand: Zimmer Biomet Pages: 23

Brand: Zimmer Pages: 16

Brand: Zimmer Pages: 2

Brand: Zimmer Pages: 32

Brand: Zimmer Pages: 96

Sonorex Super RK 31

Brand: BANDELIN Pages: 21

BTL7-A/E501-M Series

Brand: Balluff Pages: 194

Brand: B.Pro Pages: 48

Brand: ABB Pages: 16

Brand: ABB Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands