0 - 26
87726937A
Edition 12/2007
REPAIR INSTRUCTIONS
F106.6 / F106.6A
SAFETY INSTRUCTIONS
F156.6 / F156.6A
3.9
SECURING THE MACHINE
RISK OF INJURY
The machine should not be started by unauthorized
persons.
It should therefore be protected.
Secure the machine as described below:
•
Before any maintenance or repair work on the
machine.
•
Whenever attaching or changing the working
equipment.
•
Park the machine on level ground with
sufficient load-carrying capacity.
•
Lower the working equipment to the ground.
•
Apply the hand brake.
NOTE:
Do not stop the engine when under full
load, but let it run for about three to five minutes to
allow temperature balancing.
•
Switch off the engine.
•
Take the key out of the electrical system key
switch.
•
Depressurize the hydraulic system.
•
Lock the articulated joint.
•
Secure open engine hoods.
•
Secure the machine with chocks to prevent it
rolling.
•
Switch off the battery main switch and remove
the control lever.
•
Before working on the electrical system,
disconnect the batteries.
•
Before carrying out welding operations on the
machine, read the section ‘Repair - Welding
work’.