Edition 12/2007
87726937A
0 - 13
REPAIR INSTRUCTIONS
F106.6 / F106.6A
SAFETY INSTRUCTIONS
F156.6 / F156.6A
CAUTION:
Read the warning signs and instruction plates on the machine.
Keep these signs and plates clean and legible.
Replace these plates immediately if they are no longer legible.
New warning signs and instruction plates can be obtained from the spare parts department. When ordering,
part numbers can be found on the replacement parts lists for the machine.
Legend for left side
1.
Do not start up the machine before you have read and understood the operating instructions.
2.
At this point, the equipment can be secured against accidental start-up.
3.
Inspect wheel nuts regularly - see the operating instructions.
4.
Risk of injury
from hot or rotating parts in the engine compartment. Only open the engine compartment
cover when the engine has stopped.
7.
Risk of injury
due to unauthorized starting of the machine. Before working on the machine, switch off the
engine and remove the key.
9.
This plate indicates the maximum speed permitted on public roads.
10.
Lashing ropes or chains must be attached here if the machine is to be transported.
11.
Risk of injury
due to hot or pressurized hydraulic fluid. Follow the operating instructions.
12. Risk of injury
by crushing. Do not start up the machine if anyone is near the articulated joint.
Risk of injury
by crushing. Do not start up the machine if anyone is standing between the machine and
an adjoining barrier.
14.
The CE symbol certifies that this machine has been constructed according to the European regulations
on mechanical safety. L
WA
indicates the level of noise emissions in dB
A
, as stated in EC standard
2000/14/EG).
15. Driving on public roads.
This plate indicates the steps to be taken before driving on public roads.