New Holland EXITUS TL60E, Service Manual

Page: 20 / 51

INTRODUCTION
Do not clean your hands or clothes with chemicals. Chemicals, particularly solvents and fuels, dry out the skin and
can cause irritation and dermatitis. Some can be absorbed through the skin in toxic or harmful quantities.
Do not use empty containers to store other chemicals, except when they have been cleaned under supervision. Do
not attempt to sniff or inhale chemicals. Rapid exposure to high concentrations of fumes can be toxic or harmful.
Anti-corrosive protective material
These materials are varied and you must follow the manufacturers' instructions. They may contain solvents, resins,
petroleum derivatives, etc. You must avoid contact with the skin and the eyes. You must carry out spraying with
adequate ventilation and never in enclosed spaces.
Post
Dust, powders, or clouds may be irritant, harmful, or toxic. Avoid inhaling the chemical powders or dusts that result
from dry abrasion services. Use respiratory protection if ventilation is not adequate.
Electric shock
Electric shocks result from the use of faulty electrical equipment or from incorrect use.
You must keep electrical equipment in good condition and test it frequently.
Electrical equipment must be protected by a fuse with an appropriate nominal capacity.
Use low-voltage equipment ( 110 volt ) for work lights and inspection lights, wherever possible. Use pneumatic equip-
ment instead of electrical equipment wherever possible.
In the event of electrocution:
• Turn off the electricity before approaching the victim.
• If that is not possible, push or pull the victim away from the source of the electricity using a dry, non-conductive
material.
• If you have been trained, start giving first aid.
• Seek medical assistance.
Exhaust fumes
These fumes contain asphyxiating, toxic or harmful chemical substances. You must only run engines in adequate
extraction or general ventilation conditions, and never in enclosed spaces.
Fiber insulation
The fibrous nature of cut surfaces and edges can cause skin irritation. In general, the effect is physical and not
chemical. You must take precautions to avoid excessive skin contact. Take care when organizing your work methods.
Wear sleeves.
Fire
Many materials relating to vehicle repair are highly flammable. Some release toxic or harmful fumes when burned.
Scrupulously observe the fire prevention safety recommendations when storing and handling flammable materials or
solvents, particularly in the vicinity of electrical equipment or welding processes.
Before using any electrical or welding equipment, ensure that there is no risk of fire. Always have an appropriate fire
extinguisher nearby when using welding or heating equipment.
47835583A 15/02/2017
13