New Holland EH160, Service Manual

Page: 18 / 51

TRANSPORTATION
5
3. Securing Machine to Trailer
a. Use cable or wire rope with sufficient capac-
ity to secure front and rear of the machine to
trailer. See Figure 5.5A. Chock the tracks,
use the lower frame front and rear brackets
to secure machine to trailer. Also, make sure
to secure front and rear of each track.
b. Securely fasten all loose parts, as well as
removed parts to trailer or transporting plat-
form.
B. LIFTING MACHINE
The following procedures are for lifting the machine
.
These procedure do not take
into account modifications made to the machine
that affect machine weight or center of gravity.
1. Lifting Machine With Attachment Installed
a. Locate lifting locations at the front and rear
of each crawler frame. See Figure 5.5B.
b. Attach cables or wire rope with a capacity
rating sufficient to lift the machine, at lifting
locations.
FIGURE 5.5A
ALWAYS USE PROPER LIFTING EQUIPMENT AND
DEVICES. USE OF IMPROPER LIFTING EQUIPMENT
COULD ALLOW THE LOAD TO SHIFT OR FALL
CAUSING SEVERE DAMAGE, SERIOUS INJURY OR
DEATH.
A
B
FRONT
BACK
SK160LC-VI 795 mm 300 mm
(31.3”) (11.8”)
ED190-VI 879 mm 266.5 mm
(34.6”) (10.5”)
FIGURE 5.5B
FIGURE 5.5C
BLOCK
Place a hardwood or steel block between cables and
crawler frame to prevent damage to the tracks from
cables during lifting. See Figure 5.5C.
SK32004153
SECURE
ATTACHMENT
SECURE
FRONT & REAR
OF EACH TRACK
A
(Between crawler frame
tip edge & center of first
two rollers)
B
(Between front edge of
vertical rear plate &
center of last two
rollers)
W A R N I N G
W A R N I N G