New Holland EH160, Service Manual

Page: 17 / 51

TRANSPORTATION
4
g. Shut off the engine and remove all three pins
A, B, and C from blade wings, see Fig. 5.4A,
and 5.4B as reference.
Machine may move suddenly and
cause serious personal injur
y if
a control lever is accidentally
touched. Be sure the s
afety lever
is disengaged and in the loc
ked
position before exiting the cab
! WARNING
SHUT OFF THE ENGINE
AND REMOVE THE KEY
A
C
B
SK32004152
SAFETY LOCK
LEVER IN
LOCKED
(UP) POSITION
h. Proceed to fold and lock the blade wings, as
shown in Fig. 5.4C. Make sure to place pins
A, B, and C into the holes as indicated in the
figure.
15º or
less
MAKE SURE TO PLACE THE SAFETY LOCK LEVER IN THE
LOCKED (UP) POSITION BEFORE LEAVING THE CAB
W A R N I N G
FIGURE 5.4A
FIGURE 5.4B
i. Start the engine, lower the safety lever to
activate all hydraulic functions, raise the
blade and remove the wood blocks.
Make
sure to lift the safety lever before leaving
the cab.
j. With blade wings folded and blade lowered,
slowly swing machine 180
°
until attachment
is toward rear of trailer.
k. Slowly lower boom until attachment rests on
trailer bed.
l. Place safety lock lever in the up “LOCKED”
position.
m. Turn machine “OFF”, remove key and lock
all doors, filler caps and access panels.
Place a cover over the exhaust pipe of the machine and
secure to avoid water entering the engine, and possible
turbo damage.
CAUTION
FIGURE 5.4C
FIGURE 5.4D
REMOVE PINS
A, B, and C
A
B
C
MAKE SURE TO LOCK THE BLADE WINGS WITH PIN B
ON BLADE LOWER BRACKETS AS SHWON IN FIG. 5.4C
W A R N I N G
LOCK WINGS WITH PIN B ON LOWER BRACKETS