S2 - 15
SAFETY PRECAUTIONS
E265C-E305C
AVOID OPERATING THE CYLINDERS TO
FULL STROKE
Do not extend repeatedly the bucket and the arm
cylinders full stroke with the purpose of cleaning the
bucket from residual materials. This could cause
damages to the cylinders. To remove residues from
the bucket, use water under pressure or remove
them manually.
Tolerance A
≥
50 mm
PROVIDE SIGNALS FOR JOBS INVOLVING
A NUMBER OF MACHINES
For jobs involving several machines, provide signals
commonly known by all personnel involved. Also,
appoint a signal person to co-ordinate the job site.
Make sure that all personnel obey the signal
person’s directions.
PARK MACHINE SAFELY
To avoid accidents:
- Park machine on a level surface.
- Lower bucket to the ground.
- Pull the safety lever (pilot-control shut-off lever)
to the
LOCK
position.
- Turn auto-idle switch off.
- Run engine at slow idle speed without load for 5
minutes.
- Turn key-start switch to
OFF
to stop engine.
- Remove the ignition key from the key switch.
Prior to leaving the machine, close the windows, the
cab door and all panels.
TRANSPORTING THE MACHINE UNDER
SAFE CONDITIONS
During loading or unloading operations of the ma-
chine on a truck or trailer the danger for tipping over
is always present.
- Use a truck or trailer appropriate for transporting
the machine.
- Secure safely the machine to the trailer with
appropriate chains or cables. Please refer to the
chapter "
TRANSPORTATION
" of Operator's
Manual for the safe loading and unloading
procedures.
- Make sure that you comply with National and
local regulations when transporting the machine
on open roads.
