Engine - Engine and crankcase
Engine - Remove
CR10.90
NA
CR8.90
NA
CR9.90
NA
CX8.80
NA
CX8.90
NA
NOTE:
The engine and cooling system used in the combine is designed to be removed as a modular unit. The follow-
ing engine removal procedure demonstrates the removal of the engine only from the module. This procedure takes
into consideration the possible unavailability of proper, or sufficient lifting equipment for complete module removal.
When possible, remove the engine and cooling system module as designed.
1. Remove the gearbox and hydraulic pumps from the en-
gine. (Refer to
Main gearbox and drive - Remove
(14.100)
)
Place a suitable container
(1)
below the coolant drain
hose
(2)
.
NOTE:
Depending on model, the cooling system has a
coolant capacity between
50 - 60 l
(
13.2 - 15.9 US gal
). Be
sure to use clean containers with adequate capacity when
draining the cooling system.
10013105_780
1
2. Refer to
Expansion tank - Remove (10.400)
for the
coolant fluid drain and removal of the engine coolant
reservoir.
NOTE:
Depending on the model, the combine engine has an oil capacity between
29 - 35 l
(
7.7 - 9.2 US gal
). Be
sure to use clean containers with adequate capacity when draining the engine oil.
3. Remove the cap
(1)
and turn the engine oil drain valve
(2)
, to the open position. Drain all of the engine oil into
suitable containers.
10013107
2
47956065 17/05/2016
10.1 [10.001] / 3
