ASSEMBLY
OM 0471MW-A
[22]
Figure 24
Figure 25
Removing Mower from Tractor
(figures 24-25)
1. Figure 24:
Lower the tractor 3-point hitch to
maximum.
2. Figure 24:
Disconnect the driveline (item 4)
from the PTO under the tractor. Lay it down
relatively on the middle of the mower, away
from the tractor wheels.
3. Figure 24:
Pull out the latch (item 1) until it
completely goes out of the hole and rotate it
slightly until the end is against the plate
(item 3).
4. Figure 24:
Remove the lifting arm (item 2)
from the two plates (item 3).
5. Figure 24:
Rotate the latch (item 1) until it
enters the plates hole (item 3).
6.
Repeat the same installation on the
other lifting arm.
7. Figure 25:
Pull out the latch (item 3)
until it completely goes out of the hole
and rotate it slightly until the end is
against the plate. Lower the anchor
lever (item 1) and free the anchor rod
(item 2).
8. Figure 25:
Raise the anchor lever
(item 1) and lock it with the latch.
Summary of Contents for 266WMM
