manualshive.com logo in svg

New Focus Swept-Wavelength Tunable Laser Source TLB 6500 Series, User Manual

Share
Download
New Focus Swept-Wavelength Tunable Laser Source TLB 6500 Series User Manual Download Page 90

Swept-Wavelength Tunable Laser Source

™

Customer Service • 91

Customer Service

Service and Maintenance

We designed the Swept-Wavelength Laser to be maintenance free; no 
scheduled service actions are required. 

If your laser does require service, repair, or calibration, please call for a 
Return Authorization Number before shipping the unit to New Focus. 

Technical Support

Engineers are on duty from 8:00–5:00 PST Monday through Friday 
(excluding holidays) to answer questions about the performance or 
operation of your laser. Call us at 408-919-1500 or, from the USA or 
Canada, use our toll-free number, 1-866-NUFOCUS (1-866-683-6287). 
For quickest response ask for “Technical Support” and have your model 
and serial number available. The model and serial number can be read 
from the certification label on the back panel of the laser.

You can also send technical questions by email directly to our 
Technical Support department at [email protected]. We will 
typically respond to email within one business day. 

There are no user-serviceable parts inside the laser. Unauthorized 
opening of the laser will void the warranty and may result in burns, 
electric shock, misalignment of the laser cavity, and/or irreparable 
damage to the internal components.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for Swept-Wavelength Tunable Laser Source TLB 6500 Series











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands