Main Support Beam & Rafter Placement
13
10 x 10 Flat Top Louvered Pergola
1
1
2
3
S T E P S I X
2
Using a helper and two ladders proceed to complete the
following steps:
Raise one Main Support Beam Assembly at a time and insert
the Bolt Assembly into the holes to hold into place as shown.
Some force may be required to get the bolt through.
Do not tighten the nuts until all four beams are in place,
instead, simply hand-tighten them.
Once all four main support beams are in position, use
two wrenches to lock the beams into place.
Fasten the main support beams onto the Posts using the 4”
screws provided. (8 screws per post)
Place the rafters onto the main support beams as shown. Space
the middle two rafters 34” apart (Critical for louver placement)
3
www.newenglandarbors.com
