background image

The Urbanscape Raised Planter Box

North America Toll Free Phone: 1 800 282 9346 

United Kingdom Tel: (44) 2038 687160 

www.newenglandarbors.com 

www.newenglandarbors.co.uk

 

Join the two boards together, holding the root of the plant between

the opening of the boards. Carefully lower the boards onto the floor

supports. 

To prevent dirt and debris from falling through the gaps, cut a piece of

landscape fabric large enough to fill the base of the planter as well as the sides.

Cut slits in the fabric where the root of the plant is located so that the fabric

can push down to the bottom of the planter and the root ball is not trapped

 under the fabric. 

3

4

2

S T E P  T H R E E

To plant a hanging plant, remove two boards at a time and place the

stem between the two boards as shown. 

1

1

2

4

Fill the planter box with planting soil. Note to hold the landscape fabric

against the inner walls while filling the planter box with soil. Trim excess

fabric if necessary. 

Smaller plants such as herbs could also be planted above the planter box.

4

Summary of Contents for Urbanscape Raised Planter Box

Page 1: ...glandarbors co uk Check Box for These Contents In the event of missing or defective parts please call our customer service dept at 1 800 282 9346 Mon to Fri 8 00 AM to 4 00 PM EST UK Tel 44 2038 687160 Mon to Fri 1 00 PM to 10 00 PM GMT Please read through before starting assembly 1 Pre Assembled Side Wall Panels with Posts Connected 2 10946 2 Floor Panels 6 10947 3 Pre Assembled Front and Back Wa...

Page 2: ...Push the bottom shelf until the tabs lock into place Align and insert the second pre assembled side panel as shown Push down until the bottom shelf rail tabs lock into place 3 2 2 STEP ONE Insert the seven Shelf Boards into the Shelf Rails as shown aside Note that there are tabs located at the ends of the Shelf Boards Push Shelf Boards until tabs are locked into place 1 The Urbanscape Raised Plant...

Page 3: ...oard The boards will be labelled A through F Pressure fit the post caps into place Push until the caps lock into place 3 3 2 STEP TWO Fasten the Pre assembled side panels to the front and back walls using two 1 1 2 38 mm screws for the bottom rails and one of the 5 8 16 mm screw for the top rail Repeat for all four corners 1 1 3 2 B C D E F A A A A ...

Page 4: ...nough to fill the base of the planter as well as the sides Cut slits in the fabric where the root of the plant is located so that the fabric can push down to the bottom of the planter and the root ball is not trapped under the fabric 3 4 2 STEP THREE To plant a hanging plant remove two boards at a time and place the stem between the two boards as shown 1 1 2 4 Fill the planter box with planting so...

Reviews: