background image

Carefully stand the planter box on it’s legs and insert the two floor

supports into place as shown. 

The Urbanscape Raised Planter Box

4

Lay down one of the pre-assembled side panel with post down

and insert the bottom shelft as well as the two front and back

panels. Push the bottom shelf until the tabs lock into place. 

Align and insert the second pre-assembled side panel as shown.

Push down until the bottom shelf rail tabs lock into place. 

3

2

2

S T E P   O N E

Insert the seven Shelf Boards into the Shelf Rails as shown aside
Note that there are tabs located at the ends of the Shelf Boards.

Push Shelf Boards until tabs are locked into place. 

1

The Urbanscape Raised Planter Box

www.newenglandarbors.com 

www.newenglandarbors.co.uk

4

2

3

1

Summary of Contents for Urbanscape Raised Planter Box

Page 1: ...glandarbors co uk Check Box for These Contents In the event of missing or defective parts please call our customer service dept at 1 800 282 9346 Mon to Fri 8 00 AM to 4 00 PM EST UK Tel 44 2038 687160 Mon to Fri 1 00 PM to 10 00 PM GMT Please read through before starting assembly 1 Pre Assembled Side Wall Panels with Posts Connected 2 10946 2 Floor Panels 6 10947 3 Pre Assembled Front and Back Wa...

Page 2: ...Push the bottom shelf until the tabs lock into place Align and insert the second pre assembled side panel as shown Push down until the bottom shelf rail tabs lock into place 3 2 2 STEP ONE Insert the seven Shelf Boards into the Shelf Rails as shown aside Note that there are tabs located at the ends of the Shelf Boards Push Shelf Boards until tabs are locked into place 1 The Urbanscape Raised Plant...

Page 3: ...oard The boards will be labelled A through F Pressure fit the post caps into place Push until the caps lock into place 3 3 2 STEP TWO Fasten the Pre assembled side panels to the front and back walls using two 1 1 2 38 mm screws for the bottom rails and one of the 5 8 16 mm screw for the top rail Repeat for all four corners 1 1 3 2 B C D E F A A A A ...

Page 4: ...nough to fill the base of the planter as well as the sides Cut slits in the fabric where the root of the plant is located so that the fabric can push down to the bottom of the planter and the root ball is not trapped under the fabric 3 4 2 STEP THREE To plant a hanging plant remove two boards at a time and place the stem between the two boards as shown 1 1 2 4 Fill the planter box with planting so...

Reviews: