D
J
Pergola Additional Materials List
Hardware
(in plastic bag)
NOTE: WE HAVE INCLUDED 10% EXTRA SCREWS BEYOND WHAT IS IDENTIFIED BELOW.
All Screws Included with this Kit are Self-Auguring.
A.
Vinyl Weld Glue
(2)
B.
1 1/2” Self-Auguring Stainless Steel Screws
(64)
(To fasten trellis assembly to pergola posts)
C.
1 1/2” Self-Auguring Stainless Steel Screws
(24)
(For brace brackets)
D.
1 1/2” Self-Auguring Stainless Steel Screws
(24)
(To fasten shade slats to rafters)
E.
1 1/2” Self-Auguring Stainless Steel Screws
(32)
(For beam and rafter joiners)
F.
1 1/2” Self-Auguring Stainless Steel Screws
(16)
(To fasten braces to beams / rafters)
G.
1” Self-Auguring Stainless Steel Hex Head Tek Screws
(24)
(To fasten posts to mounting plates)
H.
2 1/2” Self-Auguring Stainless Steel Screws
(48)
(To fasten beams /
rafters to posts)
I.
3” Self-Auguring Stainless Steel Screws
(16)
(To fasten rafters to beams)
J.
1/8” x 2” Drill Bit
(1)
(to pre-drill holes on bottom of joiner to penetrate aluminium
inserts as necessary)
Extra Materials You will Need
We have provided mounting plates with stakes to mount your
pergola into the ground. You may, however, follow one of the
options below to better suit your need:
If Mounting Pergola with Wooden Posts (in ground)
K.
2x4x10 Pressure-Treated Lumber
(12)
(purchase at local building center)
2x4 Lumber will need to be ripped down to 1 1/2” x 3 1/4”
dimensions to fit into the hollow posts.
L.
Concrete Ready Mix
(12)
(purchase at local building center)
If Mounting Pergola onto Deck (with access to under the Deck)
M.
1/2“ Bolts with Washers and Locking Nut
(12)
(purchase at local building
center).
Length of bolts will depend on thickness of decking material.
If Mounting Pergola onto Deck (with no access to under the Deck)
N.
1/2” - 5/8“ Lag Bolts
(12)
(purchase at local building center)
Length of Lag bolts will depend on thickness of decking material.
If Mounting Pergola on existing Concrete Pad
O.
1/2” x 4” Sleeve Anchors
(12)
(purchase at local building center)
Tools You Will Need
• Level
• Hammer
• Tape Measure
• Step Ladders
(2)
• Cordless Drill
• Hex Nut Driver (5/16” or 8mm)
A
B E
N
CONCRETE - Ready Mix
Not to Scale
6
Biltmore Pergola
Purchase Separately
Purchase Separately
Purchase Separately
I
K
L
C
H
M
F
3 1/4 in
1 1/2 in
Purchase Separately
Tools You May Need
• Circular Saw with Fine Tooth Blade
• Framing Level
• Framing Square
• Hacksaw
(or a motorized cutting
device designed to cut steel)
O
Purchase Separately
G